WORKSHOPS AND EVENTS
WINTER AND SPRING 2010 WORKSHOP SCHEDULE
PLEASE REGISTER IN ADVANCE SO WE CAN BEST PREPARE AND TO MAKE SURE A
MINIMUM NUMBER OF STUDENTS IS ACHIEVED FOR A CLASS TO BE OFFERED.
TO REGISTER FOR THESE EVENTS:
CALL US at 514-7841428 OR
E-MAIL US at contact@imaginarius.ca
We require a 50% deposit for all event registrations. We reserve the right to cancel a class in case the minimum number of participants is not reached, in which case a full refund will be issued for the deposit paid.
THE CALENDAR IS PUBLISHED AT THE END OF THE PAGE
Wire wrapping
-PENDANT PROJECT
The magic of wrapping your own beautiful stones. As a learner, it's preferable to use a flat cabochon or any other flat stone or glass slice.
1 session of 2 hours
Cost: $ 40
Level: All levels
Materials: Sterling silver wire ( approx. $ 13 ). One flat stone or glass piece ( starting at $ 3.00 )
See dates on the calendar below.
The Viking Knit Technique
-BRACELET PROJECT
Make stunning bracelets, necklaces and more with this ancient wire weaving technique used by the Vikings hundreds of years ago.
1 session of 4 hours.
Cost: $ 80
Level: All levels
Materials: 1 spool of 24 gauge non-tarnish silver or gold wire at $ 7.90. Clasp and cone-aproximately $ 3.00.
See dates on the calendar below.
Wire Work for Bracelets, Necklaces and Earrings
- BRACELET AND EARRINGS PROJECT
Learn how to make jewelry with wire. Master the art of making perfect loops, spirals and shapes to produce necklaces, bracelets and earrings. You will also learn how to make your own clasps, jump rings and earwires.
1 session of 3 hours
Cost: $ 60
Level: Beginner
Materials: 1 spool of copper, gold or silver color wire at approximately $ 8.00 plus the beads and stones of your choice ( price varies ).
Wire Crochet for Jewelry Making
- NECKLACE PROJECT
Make exciting necklaces, bracelets and earrings with this easy to learn technique.
1 session of 2 hours.
Cost: $ 40
Level: All levels
Materials: 1 spool of wire $ 9.99 plus the beads and stones of your choice ( price varies).
Lampwork - Making murano glass beads
- BEADS PROJECT
Make your own glass beads by melting murano glass rods onto a steel mandrel with a small table torch.
1 session of 4 hours
Cost: $ 90
Level: Beginner
Materials: 1 pound Mapp gas - yellow bottle
( can be purchased at Rona or Reno Depot for
$ 10 ). A few murano rods ( 4 ) $ 1 each ( can be purchased at the store ).
Swarovksi Spheres
- PENDANT PROJECT
These amazing spheres can be used as pendants, set as earrings or used as jewelry components.
1 session of 2 hours.
Cost: $ 40
Level: All levels
Materials: 30 swarovski beads in 4mm size ( approximately $ 7.50 ). Monofilament thread ( price varies ).
See dates on the calendar below.
Metalwork 1
- NECKLACE PROJECT ( DESIGN VARIES )
Learn how to make your own metal jewelry components. Learn how to cut, file, texture , form, oxidize and polish metal pieces.
1 session of 5 hours.
Cost: $ 110
Level: Beginner
MATERIALS INCLUDED IN THE PRICE OF THIS CLASS: copper sheet 22 gauge / 1 foot of 20 gauge wire /and 1 foot of chain. Other beads and components are optional and paid separately.
Metalwork 2
- RING PROJECT ( DESIGN VARIES ) 
Learn the technique of basic soldering. We will be practicing in copper and producing a simple ring in sterling silver.
1 session of 5 hours.
Cost: $ 190
Level: Intermediate
Metalwork 1 is a pre-requisite
MATERIALS ARE INCLUDED IN THE PRICE OF THE CLASS
Metalwork 3
- PENDANT PROJECT
Basic soldering - We will practice soldering techniques on copper and produce a beautiful sterling silver pendant setting for a chosen gemstone cabochon.
1 session of 5 hours.
Cost: $ 190
Level: Intermediate
Metalwork 2 is a pre-requisite
MATERIALS ARE INCLUDED IN THE PRICE OF THE CLASS ( COPPER / STERLING SILVER SHEET / STERLING SILVER BEZEL WIRE / GEMSTONE CABOCHON / SOLDER AND OTHER COMPLEMENTARY MATERIALS )
Introduction to Beading
- NECKLACE AND EARRINGS PROJECT
Learn the names and purpose of a range of jewelry making components and findings, the basics of jewelry design and make a beautiful necklace and a pair of earrings.
1 session of 2 hours.
Cost: $ 40
Level: Beginner
Materials: Price varies. It starts at approximately $ 15 for making a basic set.
Wire Weaving - Pendant Setting
- PENDANT PROJECT
Weaving wire is not only a fun technique but it produces beautiful romantic pieces of art.
1 session of 2 hours.
Cost: $ 40
Level: Beginner
Materials: Silver plated wire 20 gauge ( 1 spool is approximately $7.80 ). One gemstone cabochon starting at $ 3.00.
BRAIDING WITH Kumihimo Disk – BRACELET PROJECT
Learn the ancient art of Japanese braiding - Kumihimo - as you create a beaded spiralbracelet using a Kumihimo disk.
What you will learn:
How to make a basic 8-strand beaded Kumihimo braid
How to add cone ends and a clasp to your finished braid
1 session of 3 hours.
Cost: $ 40
Level: Beginner
Materials: TBA.
SELL YOUR JEWELRY ONLINE
- ONLINE STORE SETUP PROJECT
The presenter of this workshop is a jewelry designer whose pieces are sold all over the world through the internet. She has also worked in web development for over 12 years. In this class she will present a very straightforward and easy to use online store system that has a very low cost implementation. The 3 sessions will cover the features of this system and an actual implementation and basic training. No programming experience is needed. Once installed, you will be able to manage your products online, and offer your clients a state-of-the-art store front that is easy to manage through a friendly web administration interface. Some basic computer knowledge is required.
3 sessions of 6 hours.
Cost: TBA
Level: Beginner
Workshop |
Duration |
Date and Time |
WIRE WRAPPING - Pendant Project |
1 session |
Friday, Feb 5 - 6:00 - 8:00 |
WIRE CROCHET FOR JEWELRY - Necklace Project |
1 session |
Friday, Feb 12 - 6:00 - 8:00 |
WIRE WORK - Bracelet, Earrings Project |
1 session |
Friday, Feb 19 - 5:30 - 8:30 |
VIKING KNIT - Bracelet Project |
1 session |
Saturday, Feb 20 - 1:00 - 5:00 |
WIRE WEAVING - Pendant Setting |
1 session |
Thursday, Feb 18 – 6:00 – 8:00 |
METALWORK 1 - Necklace Project |
1 session |
Saturday , Feb 27 – 12:00 – 5:00 |
METALWORK 2 – BASIC SOLDERING - Ring Project |
1 session |
Saturday, March 13 – 12:00 – 5:00 |
METALWORK 3 – BASIC SOLDERING – Pendant Setting |
1 session |
Saturday, March 27 – 12:00 – 5:00 |
INTRODUCTION TO BEADING-Necklace & Earrings Project |
1 session |
Friday, Feb 26 – 6:00 – 8:00 |
SWAROVSKI SPHERE - Pendant Project |
1 session |
Saturday, Feb 13 - 11:00 – 1:00 |
LAMPWORK – MAKE MURANO GLASS BEADS |
1 session |
Saturday, March 6 – 1:00 – 5:00 |
SELL YOUR JEWELRY ONLINE |
2 sessions |
Saturday, May 22 – 11:00 – 5:00 |
KUMIHIMO BRAIDING TECHNIQUE– Bracelet Project |
1 session |
Thursday, Feb 25 – 6:00 – 9:00 |
All events take place at Imaginarius. Prices DO NOT include tax. Materials are not included in the price otherwise indicated.
SMALL GROUPS, REGISTER EARLY ! / PETITS GROUPS, ENREGISTREZ-VOUS MAINTENANT!
Birthday Party and other special events
Imaginarius offers original Gemstone Jewelry Projects for Birthday Parties and other events.Our magic Gemstone Parties are a lot of fun for kids and adults alike.
The activity lasts around 1hour and 15 minutes and the participants get to create, string and finish a beautiful bracelet or necklace with their favorite stone.
The party can be hosted at our store ( small groups ) or at your place. You choose the location.
Call for a quote at ( 514 ) 784-1428. You may come and visit us at our store location at 4901, Boul. St. Charles, Pierrefonds, Montreal, Québec.
"Bonjour,
tout d'abord gros merci.
je voulais vous dire que les enfants ont passé un merveilleux moment samedi dernier lors de l'atelier de la fête des pierres.
Les enfants ont beaucoup aimé et Léane la fêtée fut très émue. Ils étaient tous ravis.
Cristelle est très professionnelle et aime beaucoup ce qu'elle fait.
Encore un gros merci.
À la prochaine."
Florence.
"Dear Marcia,
Thank you so much for the Metal Work course you
gave last Saturday. I am thrilled with the nice jewelry 
I made.You were patient and helpful, the content was clearly given, the time was sufficient. I am now able to do stunning jewelry...I would like to continue taking a few courses. I am very anxious to start
Metal Work 2 and learn other techniques.Obrigada, merci!"
Marie-Hélène (teacher)
"Today I had an unforgetable experience! I took a Metalwork class at Imaginarius that offered an incredible pedagogical level. The class was also extremely friendly, the instructor was patient and creative. I'm sure other courses will also estimulate my creativity and help me produce many beautiful pieces. Merci beaucoup!
Cristina Ortesi
"I recently took a Metalwork class at Imaginarius and it was a great experience. Not only is Marcia's knowledge extensive, but her teaching style is fun and relaxed. I learned a lot, thoroughly enjoyed working with the tools and techniques Marcia taught us, and absolutely love the jewelry pieces I made! Thanks so much - I can't wait until the next workshop! "
Dina C., Pointe Claire, Qc.
